null

Categories

Transducer Accessories

  • Airmar 10-Conductor In-Line Cable Splice - IP67

    Airmar

    Airmar 10-Conductor In-Line Cable Splice - IP67

    10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use...

    $32.86
  • Airmar 117WR-1 Crows Foot Transducer Wrench

    Airmar

    Airmar 117WR-1 Crows Foot Transducer Wrench

    117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

    $40.72
  • Airmar 117WR-2 Transducer Hull Nut Wrench

    Airmar

    Airmar 117WR-2 Transducer Hull Nut Wrench

    117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with:B117 B150 B744V B744VL B765C SS555 ...

    $44.08
  • Airmar 117WR-3 Double Handle Transducer Wrench

    Airmar

    Airmar 117WR-3 Double Handle Transducer Wrench

    117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

    $60.55
  • Airmar 117WR-4 Transducer Housing Wrench

    Airmar

    Airmar 117WR-4 Transducer Housing Wrench

    117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V)...

    $41.03
  • Airmar 164WR-1 Crows Foot Transducer Wrench

    Airmar

    Airmar 164WR-1 Crows Foot Transducer Wrench

    164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

    $47.13
  • Airmar 164WR-2 Transducer Hull Nut Wrench

    Airmar

    Airmar 164WR-2 Transducer Hull Nut Wrench

    164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with:B164SS164SS264 Manufacturer : Airmar Manufacturer Part...

    $60.85
  • Airmar 164WR-3 Double Handle Transducer Wrench

    Airmar

    Airmar 164WR-3 Double Handle Transducer Wrench

    164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

    $72.53
  • Airmar 175WR-4 Transducer Housing Wrench

    Airmar

    Airmar 175WR-4 Transducer Housing Wrench

    175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use...

    $44.08
  • Airmar 60WR-1 Crows Foot Transducer Wrench

    Airmar

    Airmar 60WR-1 Crows Foot Transducer Wrench

    60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

    $40.72
  • Airmar 60WR-2 Transducer Hull Nut Wrench

    Airmar

    Airmar 60WR-2 Transducer Hull Nut Wrench

    60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with:B60SS60 Manufacturer : Airmar Manufacturer Part...

    $50.18
  • Airmar 60WR-3 Double Handle Transducer Wrench

    Airmar

    Airmar 60WR-3 Double Handle Transducer Wrench

    60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

    $60.85
  • Airmar 60WR-4 Transducer Housing Wrench

    Airmar

    Airmar 60WR-4 Transducer Housing Wrench

    60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:B60SS60 ...

    $42.55
  • Airmar 75WR-1 Crows Foot Transducer Wrench

    Airmar

    Airmar 75WR-1 Crows Foot Transducer Wrench

    75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

    $42.25
  • Airmar 75WR-2 Transducer Hull Nut Wrench

    Airmar

    Airmar 75WR-2 Transducer Hull Nut Wrench

    75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with:B75SS75 Manufacturer : Airmar Manufacturer Part No...

    $51.40
  • Airmar 75WR-3 Double Handle Transducer Wrench

    Airmar

    Airmar 75WR-3 Double Handle Transducer Wrench

    75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

    $62.07